Modeling and Analysis of Crankshaft (Using ANSYS)
 |
International Journal of Recent Engineering Science (IJRES) |  |
| © 2021 by IJRES Journal | ||
| Volume-8 Issue-2 |
||
| Year of Publication : 2021 | ||
| Authors : Himanshu Bist, Himanshu Bhatt |
||
| DOI : 10.14445/23497157/IJRES-V8I2P101 |
How to Cite?
Himanshu Bist, Himanshu Bhatt, "Modeling and Analysis of Crankshaft (Using ANSYS)," International Journal of Recent Engineering Science, vol. 8, no. 2, pp. 1-9, 2023. Crossref, https://doi.org/10.14445/23497157/IJRES-V8I2P101
Abstract
Crankshaft is an important engine component used for converting the reciprocating motion of the piston to rotary motion. It is necessary to ensure that the crankshaft does not fail under load for the smooth functioning of the engine. In this paper, we performed the structural analysis of a single-cylinder crankshaft using ANSYS for 4 different materials to see which is the most suitable for it. We used Solidworks for creating the 3-d model of the crankshaft, which was then imported to ANSYS, where mesh was created and forces were applied. Then the deformation and stresses were analyzed and compared to find the regions of high-stress concentration and to see the most compatible material.
Keywords
Crankshaft, ANSYS, Solidworks, Modelling, Cylinder.
Reference
[1] Single Cylinder Crankshaft - [Online]. Available: https://www.indiamart.com/prodde tail/single-cylinder-c rankshaft-5868264055.html
[2] K.Durga Prasad, K.V.J.P.Narayana, and N.Kiranmayee, “Design and Stress Analysis of Crankshaft for Single Cylinder 4 Stroke Diesel Engine,” International Journal of Engineering Research & Technology (IJERT), vol. 7, no. 11, pp. 154-159, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[3] M.Guru Brahmananda Reddy et al., “Design & Analysis of Crankshaft by Forged Steel & Composite Material,” International Journal of Engineering Trends and Technology (IJETT), vol. 46, no. 1, pp. 29-35, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Rincle Garg, and Sunil Baghla, “Finite Element Analysis and Optimization of the Crankshaft,” International Journal of Engineering and Management Research, vol. 2, no. 6, pp. 26-31, 2012.
[Google Scholar] [Publisher Link]
[5] N.Tracy Jonafark, and Y.V.Mohan Reddy, “Computer Aided Design and Analysis of Crankshaft for Diesel Engine,” International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), vol. 3, no. 4, pp. 39-46, 2013.
[Google Scholar] [Publisher Link]
[6] Dhekale Harshada et al., “Design, Analysis & Optimization of Crankshaft Using CAE,” IPASJ International Journal of Mechanical Engineering (IIJME), vol. 4, no. 4, pp. 33-38, 2016.
[Google Scholar] [Publisher Link]
[7] S.R.Deviyaprasanth, “Evaluation of Fatigue Life of the Crankshaft,” International Journal of Scientific & Engineering Research, vol. 7, no. 4, 2016.
[Publisher Link]
[8] Sujata Satish Shenkar, and Nagraj Biradar, “Design and Static Structural Analysis of Crankshaft,” International Journal of Scientific Engineering and Technology Research (IJSETR), vol. 4, no. 7, pp. 1393-1398, 2015.
[Google Scholar] [Publisher Link]
[9] Amit Solanki, and Jaydeepsinh Dodiya, “Design and Stress Analysis of Crankshaft for Single Cylinder 4-Stroke Diesel Engine,” International Journal For Research in Applied Science and Engineering Technology (IJRASET), vol. 2, no. 5, pp. 320-324, 2014.
[Google Scholar] [Publisher Link]
[10] Jaimin Brahmbhatt, and Abhishek choubey, “Design and Analysis of Crankshaft for Single Cylinder 4 Stroke Diesel Engine,” International Journal of Advanced Engineering Research and Studies, vol. 1, no. 4, pp. 88-90, 2012.
[Google Scholar] [Publisher Link]
[11] Ansys Meshing, [Online]. Available: https://www.ansys.com/products/platform/ansys-meshing
[12] K. Thriveni, and B.JayaChandraiah, “Modeling and Analysis of the Crankshaft Using Ansys Software,” International Journal of Computational Engineering Research, vol. 3, no. 5, pp. 84-89, 2013.
[Google Scholar] [Publisher Link]