IJBTT

Harmonic Vs transient analysis of a vehicle

	International Journal of Recent Engineering Science (IJRES)
	© 2020 by IJRES Journal
	Volume-7 Issue-3
	Year of Publication : 2020
	Authors : Mir Aamir Abbas
	DOI :    10.14445/23497157/IJRES-V7I3P108

Citation 

MLA Style :Mir Aamir Abbas  "Harmonic Vs transient analysis of a vehicle" International Journal of Recent Engineering Science7.3(2020):40-43. 

APA Style :Mir Aamir Abbas. Harmonic Vs transient analysis of a vehicle  International Journal of Recent Engineering Science, 7(3),40-43.

Abstract
Harmonic (frequency response) analysis is often carried out when the input loading is simple harmonic, for instance, when the vehicle is moving on a speed breaker on the road. In the harmonic analysis, the transient vibrations are ignored, resulting in large errors in the calculations of deformations and stresses. In this work, vibration analyses of a vehicle are performed by both harmonic and transient dynamic approaches for the vehicle moving on a speed breaker, which gives a harmonic loading to the vehicle. It is seen that there is a significant difference in the predicted life. This causes large errors in the predicted fatigue life and comfort, especially at the higher excitation frequencies.

Reference
[1] “STRUCTURAL DYNAMICS THEORY AND COMPUTATION”, Mario Paz, Second edition 2004
[2] “Mechanical Vibrations and Noise”, A.G Ambekar, Engineering, Eastern Economy Edition, PHI private learning limited. 2013
[3] VipinAllien J, Hemantha Kumar and Vijay Desai “Dynamic analysis and optimization of SiC reinforced Al6082 and Al7075 MMCs” Materials Research Express, Vol. 6, No. 056528, pp. 1-20. January 2019. Publisher: IOP Publishing, https://doi.org/10.1088/2053-1591/ab038e.
[4] VipinAllien J, Hemantha Kumar and Vijay Desai “Semi-active vibration control of SiC reinforced Al6082 MMC sandwich beam with magnetorheological fluid core” Journal of Materials: Design and Applications, pp. 1-17. Publisher: SAGE, DOI: 10.1177/1464420719890374. November 2019.
[5] VipinAllien J, Hemantha Kumar and Vijay Desai “Semi-active vibration control of MRF core PMC cantilever sandwich beams: Experimental study” Journal of Materials: Design and Applications, pp. 1-12. January 2020. Publisher: SAGE, DOI: 10.1177/1464420720903078.
[6] VipinAllien, Hemantha Kumar and Vijay Desai “Free vibration analysis and selection of composite for high strength and stiffness using multi-attribute decision making” International Journal of Materials Research, pp. 1-8. February 2020. Publisher: HANSER Publications, https://doi.org/10.3139/146.111879.
[7] VipinAllien, Hemantha Kumar and Vijay Desai “An investigation on characteristics and free vibration analysis of laminated chopped glass fiber reinforced polyester resin composite” Journal of Engineering and Applied Sciences, Vol. 11, No. 18, pp. 11016- 11022, Publisher: Asian Research Publishing Network, September 2016.
[8] Mir Aamir Abbas,” A Mathematical Model For Harmonic Analysis Of An Inclined 3-Dof Cantilever Beam”, International Journal Of Scientific Research And Review, Volume 7, Issue 9, 2018, pp522. DOI:16.10089.IJSRR.2018.V7I06.5245.2410
[9] “Dynamic Magnification Factor of SDOF oscillators under Harmonic Loading”, Luisa María Gil-Martín et al., AMI letters pararepositorio
[10] Abbas, M. A. (December 7, 2018). “Development of a Finite Element Model for Pressure Test Simulation of Transformer Tanks With Skid Bases.” ASME. J. Pressure Vessel Technol. February 2019; 141(1): 014501. https://doi.org/10.1115/1.4041863
[11] http://www.brown.edu/Departments/Engineering/Courses/En4/Not es/vibrations_forced/vibrations_forced.htm, 5.4 Forced vibration of damped, single degree of freedom, linear spring-mass systems.
[12] https://en.wikipedia.org/wiki/Vibration, Wikipedia
[13] Practical Finite Element Analysis, Nitin S Gokhale, Finite to infinite publishers,2008
[14] Supplementary notes, L.Anand, D.M. Parks, 2004, MIT
[15] DILEEP T, Dr. Manjunath H, “Transient Thermal Analysis of Aero Engine Static Structures”, SSRG International Journal of Mechanical Engineering, Vol-5 Iss-10,2018
[16] Rahul Tekade, Chinmay Patil"Structural and Modal Analysis of Shock Absorber of Vehicle", International Journal of Engineering Trends and Technology (IJRES), V21 (4), 173-186 March 2015.

Keywords
Vibration, Transient, Harmonic, total response, steady state